FREDL "EFI PXE 0 for IPv4 boot failed" Error

Written By:
Dave Kelsey
Last Edited:

If you receive a message similar to this, the boot order of your FREDL needs to be modified.

1. Power on FREDL and press the "F2" key repeatedly to enter the BIOS setup. Use the arrow keys or mouse to select "Setup Utility".

2. This is the menu you'll see.

3. Use arrow keys or mouse to move selection down to "Boot" and select "EFI". 

4. The EFI boot menu will likely show that a PXE device is the top boot option.

5. Press "F5" or "F6" to move "Windows Boot Manager" to the top position.