UltraBlock PCIe Kit
The UltraBlock PCIe enables portable forensic acquisition of PCIe SSDs. With the UltraBlock PCIe you will be equipped to handle the vast array of new laptops and tablet computers that are making use of these high performance PCIe Solid State Drives.
REQUIRED PCIe ADAPTERS SOLD SEPARATELY
The UltraBlock PCIe must be used with a Tableau PCIe SSD adapter for each specific PCIe SSD form factor and connector.
|A1500||PCIe Card SSD Adapter (TDA 7-1)|
|A1510||PCIe M.2 SSD Adapter (TDA 7-2)|
|A1515||PCIe Apple SSD Adapter (TDA 7-3)|
|A1640||PCIe Bundle (TDA 7-1, 7-2, 7-3)|
Compatible With Key "M" M.2 PCIe SSDs Shown Below (5 Pins)
Not Compatible With SATA M.2 SSDs.
- UltraBlock Forensic PCIe Bridge
- 4" PCIe Cable
- Power Supply
- USB3 Host Cable
- Nylon Kit Bag
|Connectors: Host (Left) Side|
|USB 3.0||One USB 3.0 Standard-B connector|
|Connectors: Device (Right) Side|
|PCIe||One Proprietary PCIe connector|
|Connectors: Top Side|
|DC Input||One 5-pin Mini-DIN connector for the Tableau TP2 power supply, and one bayonet connector for the Tableau TP5 power supply|
|DIP Switch||The 4-position DIP switch configures user-selectable options that are not required for normal operation. See the T7u Quick Reference Guide for more information|
|LCD||2 Row x 16 Column monochrome LCD character display with LED backlight|
|Buttons||Three buttons: "Menu" and "Enter" buttons for navigation, plus an "On/Off" button to control the power|
|Status LEDs||Six LEDs: DC IN, Power, Host (detect), Device (detect), Wrt Block (enabled), Activity|
|PCIe Device||PCIe devices that comply with the AHCI standard or NVMe 1.0 specification are supported by the TDA7 family of PCIe adapters|
|Host OS||Microsoft Windows version 7, 8, 10|
|Macintosh OS X|
|Most modern Linux distributions (Note: Linux distributions have varying levels and quality of support for USB 3.0)|
|Physical / Environmental|
|Power||12 watts typical operating (not including PCIe device or TDA7-family adapter)|
|Supply Voltage (DC IN)||+5V @ 0.35A (max), +12V @ 0.25A (max) when powered using a Tableau TP2 power supply|
|+12V @ 0.4A (max) when using a Tableau TP5 power supply|
|Output Voltage (DC OUT)||+12VDC @ 2.0A (max)|
|Dimensions||5.625 in. (L) x 3.25 in. (W) x 1.125 in. (H)|
|Operating Temperature Range||0 to 55 degrees C (no airflow)|
|Storage Temperature Range||-20 to 60 degrees C|
|Relative Humidity||Up to 90% (non-condensing)|
The UltraBlock PCIe conveniently bridges from a write-blocked native storage interface (PCIe) to a hot-swappable interface on a host computer (USB 3.0).
LCD AND LEDS
The UltraBlock PCIe includes a backlit character LCD to display useful information about the bridge and connected PCIe media. In addition, six LEDs provide status on power, PCIe media detection, host connection, write-block status, and activity.
The UltraBlock PCIe images PCIe SSD media at blazing speeds. Imaging performance up to 330MB/sec (~19 GB/min) were observed.
The 4-position DIP switch configures user-selectable options. Default setting is switch one “OFF” (write-blocked). Toggle switch one to “ON” for read/write operation. The switch block is accessible by removing knock-out panel on bottom of the UltraBlock.
|PC Interface||USB (2.0/3.0)|
|Drive Interfaces||Peripheral Component Interconnect Express (PCIe)|
|Operational Modes||Write Block and Read/Write|
NOTE: If you purchased this device prior to Sep 19, 2017 you'll need to download and apply v7.19+ firmware update available at Guidance Software's Web Site for PCIe Gen 2 and Gen 3 compatibility.